- SEPR up to 9.1 and SEER up to 7.7
- Twin-rotor screw compressor equipped with a high efficiency motor and a variable capacity valve that permits exact matching of the cooling capacity to the load.
- Flooded multi-pipe heat exchangers for increased heat exchange efficiency.
- Electronic expansion device permitting operation at a lower condensing pressure and improved utilisation of the evaporator heat exchange surface.
- Economiser system with electronic expansion device for increased cooling and heating capacity 30XW(-/H)C and 30XW(-/H)P.
AquaForce® - 30XWH / 30XWHP
Fixed-speed water-cooled screw liquid chiller & water-sourced screw heat pump
The 30XWH heat-pumps are designed for industrial and commercial applications where installers, consultants and building owners require high performance and proven reliability.
- Designed to optimise energy use
- Designed for reliable operation
- Safe Design
- Low operating sound levels
- Supports emissions reduction goals
- Refrigerant :
- R-134a
- Compressor :
- screw fixed-speed
- Nominal cooling capacity :
- 270-1,760 kW
- Nominal heating capacity :
- 320-2,030 kW
- Efficiency :
- High, Standard
- Application :
- Office building, Hotel & Leisure, Healthcare, Industry, Education
Range
30XWH - Entry-level efficiency
Offer an optimised balance of technical and economical aspects.
30XWHP - Premium-efficiency
Offer unequalled energy efficiency to satisfy the most stringent demands of building owners wanting to reduce operating costs to the minimum.
Features & Benefits
- Silencers on the compressors discharge line
- Silencers on the economiser return line
- Acoustic insulation on the components that are most subjected to radiated noise
- Option 257 further reduces the global unit sound level
- Compact design
- Simplified electrical connections
- Simplified water connections
- Fast commissioning
- R-134a refrigerant
- Leak-tight refrigerant circuit
- Features designed to support overall system performance and reliable operation
- Major components are selected and tested to minimise failures possibility, as well as many design choices have been taken in this perspective
- Industrial-type screw compressors with oversized bearings and motor cooled by suction gas
- All compressor components are easily accessible on site minimising down-time
- Two independent refrigerant circuits (from 1000 kW upwards); the second one automatically takes over, if the first one develops a fault, maintaining partial cooling under all circumstances
- Auto-adaptive control
- Extensive endurance tests
- Equipped with oversized roller bearings and oil pressure lubrication designed to support operation, even at maximum load
- Precise adjustment of the compressor cooling capacity
- If a fault occurs, the compressor does not switch off, but continues operation with a reduced capacity (unloaded mode)
- The silencer in the discharge line reduces discharge gas pulsations for quieter operation
- The condenser includes an oil separator that helps reduce the amount of oil circulating in the refrigerant circuit and redirects it to the compressor
Controls
SmartVu™ control
- Intuitive and user-friendly, coloured, 4.3" interface
- 10 languages available
- Easy access to the controller box
- Password protection
- Night-modex
- Energy management
Options
- Low/Medium-temperature brine solution
- Light-brine solution, down to -3°C
- Unit supplied in two assembled parts
- Lead/lag operation
- Single power connection point
- Evaporator pump electrical power / control circuit
- Evaporator dual pumps electrical power / control circuit
- Condenser insulation
- Service valve set
- Lon, J-Bus or BacNet gateway
- High condensing temperature
- Condensing temperature limitation
- Control for low condensing temperature systems
- Touch Pilot control, 7" user interface
- Leak detection
- Low noise level






