- Compliant with EU Eco-design Minimum Efficiency Performance Standards (MEPS) in heating that apply from September 2015
COP of up to 6.7 and SCOP up to 6.5 - Twin-rotor screw compressor equipped with a high efficiency motor and a variable capacity valve that permits precise matching of the cooling capacity of the load requirements
- Flooded multi-pipe heat exchangers for increased heat exchange efficiency
- Electronic expansion device permitting operation at a lower condensing pressure and improved utilisation of the evaporator heat exchange surface
- Economiser system with electronic expansion device for increased cooling capacity
AquaForce® - 30XWHPZE
Water-cooled screw chiller & water-sourced screw heat pump using HFO R-1234ze refrigerant or R-515B
The 30XWHPZE heat-pumps are designed for industrial and commercial applications where installers, consultants and building owners require high performance and proven reliability.
- Designed to optimise energy use
- Designed for reliable operation
- Safe Design
- Easy and fast installation
- Supports emissions reduction goals
- Refrigerant :
- R-1234ze / R-515B
- Compressor :
- screw fixed-speed
- Nominal cooling capacity :
- 265-1,110 kW
- Nominal heating capacity :
- 320-1,300 kW
- Efficiency :
- High
- Application :
- Office building, Hotel & Leisure, Healthcare, Industry, Education
Features & Benefits
- Twin-rotor screw compressors with a variable capacity valve
- PUREtec™ R-1234ze refrigerant
- R-515B future-proof A1 refrigerant
- Smartvu™ control system
- Flooded heat exchangers that are mechanically cleanable
- Can provide an evaporator leaving temperature down to 3.3°C
- Can deliver up to 55°C (70°C optional) on the condenser side when operating as a heat pump
- Silencers on the compressors discharge line
- Silencers on the economiser return line
- Acoustic insulation on the components that are most subjected to radiated noise
- Option 257 further reduces the global unit sound level
- Compact design
- Simplified electrical connections
- Simplified hydraulic connections
- Fast commissioning
- R-1234ze HFO refrigerant with GWP (Global Warming Potential) < 1 and ODP (Ozone Depletion Potential) = 0
- R-515B A1 refrigerant
- Leak-tight refrigerant circuit
- Features designed to support overall system performance and reliable operation
- Major components are selected and tested with R-1234ze and R-515B refrigerant to minimise failures possibility, as well as many design choices have been taken in this perspective
- Industrial-type screw compressors with oversized bearings and motor cooled by suction gas
- All compressor components are easily accessible on site to facilitate maintenance operations
- Two independent refrigerant circuits (from 1000 kW upwards); the second one automatically takes over, if the first one develops a fault, helping maintain partial cooling following a circuit fault
- Auto-adaptive control
- Extensive endurance tests
- Specific polyol ester oil qualified by Carrier for using with HFO-1234ze or R-515B selected to maintain reliable bearing lubrication
- Specific compressor gaskets compatible with HFO-1234ze or R-515B, tested and validated by Carrier
- New relief valves designed for operation with HFO-1234ze or R-515B
- Specific electrical box with increased tightness and integrated blower that maintains positive air pressure designed to reduce the risk of ignition
- New control algorithms
- Specific documentation that contains all the installation, operation, maintenance and safety instructions
- Equipped with oversized roller bearings and oil pressure lubrication designed to support operation, even at maximum load
- Precise adjustment of the compressor cooling capacity
- If a fault occurs, the compressor does not switch off, but continues operation with a reduced capacity (unloaded mode)
- The silencer in the discharge line reduces discharge gas pulsations for quieter operation
- The condenser includes an oil separator that helps reduce the amount of oil circulating in the refrigerant circuit and redirects it to the compressor
Efficiency
- SEER 12/7°C up to 7.3
- SEPR 12/7°C up to 9.3
Controls
- Intuitive and user-friendly, coloured, 4.3" interface
- 10 languages available
- Easy access to the controller box
- Password protection
- Night-modex
- Energy management
- Easily accessed from the internet
- Multiple remote control, monitoring and diagnostic possibilities
- Optional communication gateways
- Condenser pumps control
- Start/Stop of the machine
- Dual set-point management
- Demand limit setting
- Operation visualisation
- Alarm visualisation
- Extended remote control possibilities: room temperature, set-point reset, etc.
Options
- Light-brine solution, down to -3°C
- Lead/lag operation
- Single power connection point
- Evaporator pump power / control circuit
- Evaporator dual pumps power / control circuit
- Condenser pump power / control circuit
- Condenser insulation
- Service valve set
- Lon, J-Bus or BacNet gateway
- High condensing temperature
- Condensing temperature limitation
- Control for low condensing temperature systems
- Touch Pilot control, 7" user interface
- Low noise level
Carrier meeting the challenge of efficiency and climate change with PUREtec™ range.
Four years after the first installation of a water-cooled screw chiller based on HFO refrigerant in Europe, Carrier’s AquaForce chiller units with PUREtec refrigerant have been installed in more than 500 projects throughout the region, in multiple applications such as industrial, data centers, district heating, and healthcare.




