- Designed for high performance both at full load and at part load
- SEPR up to 10.7 and SEER up to 8.8
- Inverter-driven twin-rotor screw compressors allow precise capacity matching of building load changes and reduce unit power input, especially at part-load
- Flooded multi-pipe heat exchangers for increased heat exchange efficiency
- Electronic expansion device permitting operation at a lower condensing pressure and improved utilisation of the evaporator heat exchange surface
- Optimised electrical performance
AquaForce® - 30XW-VZE
Variable-speed water-cooled screw chiller using HFO R-1234ze refrigerant or R-515B
The 30XW-VZE water-sourced units are designed for commercial and industrial applications where installers, consultants and building owners require high performance, particularly at part load.
- Designed to optimise energy use
- Designed for reliable operation
- Safe Design
- Easy and fast installation
- Minimised operating sound levels
- Supports emissions reduction goals
- Designed for high-efficiency building applications
- Refrigerant :
- R-1234ze / R-515B
- Compressor :
- screw variable-speed
- Nominal cooling capacity :
- 450-1,635 kW
- Efficiency :
- High
- Application :
- Office building, Hotel & Leisure, Healthcare, Industry, Education
Features & Benefits
- Supports overall system performance
- Inverter-driven screw compressors with oversized bearings and motor cooled by suction gas (liquid cooled motor on 1401 & 1601 models). The inverter is optimised for each compressor motor to ensure reliable operation and easy maintenance
- Two independent refrigerant circuits
- Auto-adaptive control
- Extensive endurance testing
- Specific polyol ester oil qualified by Carrier for using with HFO-1234ze or R-515B to guarantee and maintain reliable bearing lubrication
- Specific compressor gaskets compatible with HFO-1234ze or R-515B, tested and validated by Carrier
- New relief valves designed for operation with HFO-1234ze or R-515B
- New control algorithms
- Specific documentation that contains all the installation, operation, maintenance and safety instructions
- Compact design
- Simplified electrical connections
- Simplified water connections
- Fast commissioning
- HFO R-1234ze refrigerant or R-515B
- Leak-tight refrigerant circuit
- Low noise Greenspeed® variable-speed fans
- The inverter technology used for the compressor motors minimises noise levels at part load operation
- Silencers on the compressor discharge line
- Sound insulation on the components that are most subjected to radiated noise
- Option 257 further reduces the global unit sound level
- Building cooling loads can vary significantly throughout the year, requiring systems capable of maintaining efficient operation across a wide operating range. Selecting an air-conditioning system that delivers strong performance at both full and part load is an important consideration for many commercial and industrial projects.
- The 30XW-VZE unit is designed to address these operating conditions through inverter-driven screw compressor technology, precise capacity control and high part-load efficiency. By continuously matching cooling capacity to building demand, the unit helps maintain efficient operation under varying load conditions.
- Combining advanced control capabilities with high seasonal efficiency, the 30XW-VZE provides a solution for applications where energy performance, operational reliability and occupant comfort are key project requirements.
- Advanced control algorithms combine inverter frequency output with motor input logic to minimise mechanical part stress, resulting in optimised compression performance and high chiller reliability
- Equipped with bearings with oversized rollers, oil pressure lubricated for reliable and durable operation, even at maximum load
- Screw compressors use positive displacement principle to compress gases at higher pressure. As a result, in case of exceptional high temperature condenser side, the compressor does not switch off, but continues operation at reduced capacity (unloaded mode)
- The silencer in the discharge line considerably reduces discharge gas pulsations for quieter operation
- Condenser includes an oil separator that minimises the amount of oil in circulation in the refrigerant circuit and redirects it to the compressor function
Controls
- An intuitive user-friendly coloured 7" interface
- Direct access to the unit's technical drawings and the main service documents
- Screen-shots with coincisive and clear information in local languages
- Complete menu, customised for different users
- Safe operation and unit setting: password protection ensures that unauthorised people cannot modify any advanced parameters
- Simple and "smart" intelligence uses data collection from the constant monitoring of all machine parameters to optimise unit operation
- Energy management
Carrier meeting the challenge of efficiency and climate change with PUREtec™ range.
Four years after the first installation of a water-cooled screw chiller based on HFO refrigerant in Europe, Carrier’s AquaForce chiller units with PUREtec refrigerant have been installed in more than 500 projects throughout the region, in multiple applications such as industrial, data centers, district heating, and healthcare.





