- External wall with RAL 7035 paint
- Casing resistance: class D1
- Casing airtightness: class L1
- Filter bypass leak: class F9
- Thermal transmittance: class T2
- Thermal bridge factor: class TB2
39CP-ST/CL
Air-handling unit
The 39CP-ST/CL range is designed for the service sector, industry and healthcare markets, to meet different requirements in terms of air mixing, filtration, heating, refrigeration, dehumidification, humidification, ventilation, recovery and sound attenuation.
- AHU for all applications
- Designed to meet the EN 13053 and EN 1886 standards
- The effective solution for service sector, industry and healthcare applications
- Air flow :
- 25,000-60,000 m3/h
- Application :
- Office building, Administration, Healthcare, Industry, Retail
Range
- 4 sizes to handle air flow rates from 25,000 to 60,000 m3/h
- Available in a single or dual-flow version
- Horizontally-mounted version for installation indoors or outdoors with a roof and protection accessories
Features & Benefits
- Double skin panels with 50 mm mineral insulation
- Peripheral frame fitted or mounting brackets in stainless steel
- Depending on the size, double-skin panels, galvanised, coated and smooth walls
- At least one removable panel per function
- Isolation damper
- Safety damper
- Control damper
All the dampers consist of airfoil blades, counter rotating with lateral seals and driven by toothed wheels or control rods.
- Air intake boxes: single air intake, mixing, economiser mixing
- Air discharge box: directional, distribution
- Wide range of filter efficiencies, technologies and dimensions
- On sizes 150 to 1,350, compact filters are available to optimise energy consumption
- Shielded resistors in scrolled stainless steel finned tubes
- Connection to copper strips
- Double insulation assembly
- Safety thermostat with automatic and manual reset
- Spray - Efficiency 80% to 90%
- Stainless steel module with sloped bottom
- 2 or 3 sprays ramps
- Drain screens
- Water tank with its supply equipment
- Without steam production
- Stainless steel steam distributor
- Permissible steam pressure range
- Cast iron steam/water separator
- Main steam valve
- With steam production (standalone with electrodes)
- aluminium steam distributor
- Steamer with electrical cabinet and controller (IP20)
- Proportional or on/off control
- Humidity controller or control sensor
- Duct/cylinder connection
- Condensate return tubes and connections
- With steam production (standalone with heaters) on consultation
- Forward-curved dual-inlet fan
- Backward-curved dual-inlet fan
- Plug fan
- EC plug fan
- Steel scroll and impeller
- Assembly on anti-vibration frame
- Plate
- Standard construction or HEE plate heat exchanger
- aluminium plates
- Condensate drain pan on exhaust air side
- Heat pipe (gravity type)
- Constructed in the same way as a coil with several rows of finned tubes
- Standard construction: copper tubes, aluminium fins, galvanised steel casing
- Transfer fluid: refrigerant, operation from -25°C to +50°C
- Assembly in either vertical, fixed horizontal or mobile horizontal position on shaft
- Rotating
- Corrugated aluminium exchange medium
- Adjustable midway and peripheral gasket to guarantee a minimum leak flow rate
- Lateral inspection panel
- Constant speed gear motor
- Maintenance-free ball bearing
- Baffles
- Mineral wool of different densities
- Galvanised panels
Accessories
- Standard flexible sleeves for the outside of the casing
- Insulated flexible sleeves for the outside of the casing
- Rain protection frame with bird screen
- Grille frame for protection of the air handling orifices on AHUs
